Making a Quick and Simple “Stop” for Multiple Cuts

When I’m cutting a lot of boards the same length and angle, it doesn’t make sense to measure each time, or mark multiple cuts along a single board. Employing a block stop system is not only efficient, it also allows the boss to set up a cut and turn someone loose on the task who knows how to safely run the saw and won’t have to worry about careful measuring.

quickstop1Use scrap wood – 2 pieces of 2x material + a piece of 3/4” material (plus whatever needed) to create a support base that is at the same level as the cutoff saw’s base. In this photo a layer of cardboard was used under the 3/4” material to obtain the right level.

quickstop5Check that the base of the saw is at the same level as the support base.

quickstop2Secure the cutoff saw to the worktable. Then square up one end of a board and mark it for your proper length to be cut multiple times, creating your set-up board.

Lay the set-up board so the length mark is directly under the blade. Center the support base under the other end. Fasten both 2x scraps down securely to the work table. Leave the 3/4” scrap loose for now.

quickstop3Nick the set-up board with the blade at the length mark. No need to cut it to length, you might have a use for it elsewhere.

quickstop4Keeping the set-up board held securely, flush edges with the 3/4” scrap. Pencil mark the 2x support base.

quickstop9Fasten the 3/4” scrap to the 2x support base at your pencil mark: the end of this board is your stop length.

quickstop8Use a straight cut scrap to flush the 3/4” stop board edge with the board to be cut. Start cutting! If you are cutting angles, just make sure the top of the angle hits the stop block. Otherwise you risk undermining.

quickstop6

Thanks for stopping by! Be sure to check out our suspension bridge book. Here is the link:

Building a Small Cable Suspension Bridge with the Cable Locking System

Images, diagrams, and text copyright 2013-2017 by Marvin Denmark unless otherwise noted. Please do not copy and post my content anywhere without my permission. Thank you.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s