Our house has posts, beams, and siding made from Douglas fir milled on our property. I decided to employ another kind of wood for a fireplace mantel. Bitter cherry, also called Oregon cherry (Prunus emarginata) is a native tree that popped up in our woods when it was replanted in 1988. I wondered what the grain and color would look like when it was milled. It has an interesting bark, that much I knew.
So I picked a tree I liked and thinned the woods by one cherry tree. I parked it in the barn to dry for about five months, then had it milled to about a five foot 5-1/2″x7″ with bark edge on the 7″ width.
As control against splitting, I scored slices on one side in varying depths, the deepest being the middle cut over the tree center at about 1-1/2″ deep. Then I primed the sawn sides and left it to dry, standing up, for about 3 more months.
I was hoping to preserve the bark, so cutting and fitting the corners was tricky. I sanded down the precautionary slices (which were on the bottom) and cut the pieces. I sanded, splined and glued it all together, then applied a clear finish. The bark is threatening to peel, but underneath looks pretty cool so I really don’t care.
I used a bracket system to install the 35+ pound mantel. I hollowed out two slot holes at 9/16″ depth on the backside that corresponded with metal brackets that screwed to the wall studs.
Metal straps, which were recessed so that the mantel would fit flush with the wall, were screwed across the hole slots. Taping their location on the mantel top, I could line them up with the marked brackets.
A bit of hammering with someone else holding on, and the mantel was up.
I have 3″ metal posts that I had intended to install on either side, not for support just for looks, but for now we’re seeing if we like just having a floating mantel. Eventually there will be a wall sculpture underneath. I’m just waiting for my spousal unit to come up with something…
Thanks for stopping by! Be sure to check out our bridge book if you’re thinking about a DIY suspension bridge. Here is the link: Building a Small Cable Suspension Bridge with the Cable Locking System
Images, diagrams, and text copyright 2016 by Marvin Denmark unless otherwise noted. Please do not copy and post my content anywhere without my permission. Thank you.